Design House Springdale Springdale Oil Rubbed Bronze Single-Cylinder Deadbolt Keyed Entry Door Handleset Accent 700567
-
Detail
Description
The Design House 700567 Coventry 2-Way Latch Entry Door Handle Set accepts a key on one side of the lock but is operated by a handle on the other side. Finished in oil rubbed bronze and designed for left or right hand doors, this handle and keyway fit the two most common backsets in the U.S. (backset is the distance from the edge of the door to the center of the bore hole), which are 2-3/4-inch and 2-3/8-inch. The 1/2-inch latch bolt is plated in nickel and does not budge once in place. Entry handles are often used on front doors and back doors. Use this handle on standard 1-3/8-inch and 1-3/4-inch thick doors. This product has a 1-inch by 2-1/4-inch radius corner face plate and 5-pin security. If you are preparing your door for installation, the cross bore should be 2-1/8-inches in diameter and the edge bore should be 1-inch in diameter. This product comes with a 5-year mechanical and 5-year limited finish warranty Finished in oil rubbed bronze and designed for left or right hand doors ANSI Grade-3 Certified for residential security Fits 2-3/4-inch and 2-3/8-inch backsets; Fits 1-3/8-inch and 1-3/4-inch thick doors Entry lock is operated by a key on the exterior and is by a turn-button knob on the interior 5-Year limited mechanical/5-Year limited finish warranty CA Residents: Prop 65 Warning(s)